Manuals / JVC / Kitchen Appliance / Range

JVC toledo You will also need the following tools, Checking the Parts, Installation

Models: toledo

1 40

Download 40 pages 44.25 Kb

Page 22

Image 22

INSTALLATION

Check the appliance is electrically safe and gas sound when you have nished.

You will need the following equipment to complete the cooker installation satisfactorily:

•Flexible gas hose.

•Gas pressure tester/manometer.

•Multimeter: For electrical checks.

You will also need the following tools:

1.Electric drill

2.Masonry drill bit (only required if tting the cooker on a stone or concrete oor)

3.Wall plugs (only required if tting the cooker on a stone or concrete oor)

4.Steel tape measure

5.Cross head screwdriver

6.Flat head screwdriver

7.4 mm & 3 mm Allen keys

8.Spirit level

9.Pencil

10.Adjustable spanner

11.13 mm spanner or socket wrench

12.Screws for tting the restraining chain and bracket

Checking the Parts:

3 pan supports

Griddle plate

Wok cradle

Grill pan & trivet

Flat shelves & drop shelves

Roasting tin

HandyrackSplashback

Plinth

Stability bracket

Restraining chain & hook

Page 22

Image 22

JVC toledo installation instructions You will also need the following tools, Checking the Parts, Installation

Contents

110 Dual Fuel Installation InstructionsUser Guide U108600-07Contents surfaces To avoid overheating, DO NOT install the cooker 1. Before You StartWARNING The appliance and its accessible parts nnDO NOT use a steam cleaner to clean the cookerand ammable liquids a safe distance away from your cooker nnThis appliance is heavy so take care when moving itAlways keep combustible materials, e.g. curtains DO NOT store ammable materials in the storageFig.2-1 2. Cooker OverviewHotplate Burners B C E D FPage DO NOT put it on any other burner - it is not DO NOT put it crossways - it will not t properly andwill be unstable Fig.2-12 designed to t in any of the other pan supportsFig.2-15 Fig.2-16 nnNever close the grill door when the grill is onArtNo.210-0001 Classic grill control Use only heat resistant dishesThe Browning Element The OvensOperating the Ovens The Conventional OvenMinute Minder Setting the Time of DayB C D To Stop the Ovens AutomaticallyKey Lock AUTO is Showing, You Want to Reset to Manual CookingFig.2-31 Fig.2-36 Oven ShelvesThe Handyrack Main Oven Fig.2-39 Fig.2-40DO NOT use the timed oven if the adjoining oven is Tips on Cooking with the TimerGeneral Oven Tips already warm4. Cooking Table The Single Ring Burners 5. Cleaning Your CookerDO NOT mix dierent cleaning products - they may The Wok BurnerDO NOT use harsh abrasive cleaners or sharp metal ‘Cook & Clean’ PanelsBefore you remove any of the grill parts for cleaning DO NOT use steel wool, oven cleaning pads, or anyHotplate Cleaning TableRemoving the Main Oven Linings Outside of CookerWhat cleaning materials are recommended for the cooker? 6. TroubleshootingHotplate ignition or hotplate burners faulty Never use caustic or abrasive cleaners as these willThe oven door is misaligned An oven light is not workingFig.6-1 Fig.6-2 Out of Warranty 7. InstallationIf You Have a Problem Please NoteINSTALLATION Installer’s Name Installer’s CompanyInstaller’s Telephone Number Before installation, make sure that the localYou will also need the following tools INSTALLATIONChecking the Parts 2. Side Clearances - Measurements B & C INSTALLATION1. Overhead - Measurement A 3. Side Clearances - Measurement D & ECompleting the Move INSTALLATIONLowering the Two Rear Rollers Fig.7-3 Fig.7-4 Fig.7-5Fitting a Stability Bracket INSTALLATIONFitting the Stability Bracket and Chain Fitting the Restraining ChainClassic only INSTALLATIONFig.7-10 Fig.7-11 nnThe handles should be above the xingsPropane INSTALLATIONNatural Gas 600Fig.7-12IF IN DOUBT, PLEASE CONTACT A SUITABLY QUALIFIED ELECTRICIAN Fixed WiringCurrent Operated Earth Leakage Breakers nnWARNING THIS APPLIANCE MUST BE EARTHEDCustomer Care Final ChecksFitting the Plinth Hotplate CheckWhen servicing or replacing gas-carrying 8. Conversion to LP Gasinvalidate any warranty or liability claims and lead to prosecution Classic - Removing the Control PanelPage 1.2 To Remove the Side Panels 9. Servicing1.1 To Remove the Control Panel 2.1 To Remove the Hotplate2.6 To Change the Warmer Neon 3.1. To Replace the Ignition or Light Switch2.5 To Replace a Hotplate Burner 2.2 To Replace the Hotplate Control Taps3.4 To Change the Ignition Generator 3.3 To Change the Warmer Switch3.2 To Replace the Clock 4.1 To Replace the Grill Controller5.3 To Change the Fan in the Right-hand Oven 5.1 To Replace a Thermostat5.2 To Remove the Right-hand Oven Inner Back 5.4 To Remove an Oven Element Thermal Cut-outBottom Element 5.5 To Remove the Right-hand Oven Element5.6 To Remove the Left-hand Oven Bottom and Top Elements Top Element6.2 To Replace an Oven Door 6.3 To Adjust an Oven Door Angle6.6 To Adjust an Oven Door Catch Keep 6.4 To Replace an Oven Door Outer PanelDescription 10. Circuit DiagramDescription ColourUsable volume litres 11. Technical DataMaximum power output @ 230V 50 Hz COUNTRY OF DESTINATION AustraliaTel +44 0 1926 457400 Fax +44 Clarence Street, Royal Leamington Spa Warwickshire, CV31 2AD, EnglandE-mail consumers@falconappliances.co.uk