Quitting—Disconnecting from the Computer
Complete these steps when you have completed your work with the camera and the computer.
CAUTION:
Do not disconnect the camera from the computer while the DCS Host Software is running. Doing so may result in the loss of data from the PC Card. Be sure to exit the software before disconnecting from the computer.
☛You can connect or disconnect the camera without turning the camera or the computer off.
1If the DCS Host Software is running, click the Done button from the Image window.
2Disconnect the camera from the computer.
Using the Card Reader
If your computer has a card reader, you can access images by placing a PC Card containing camera images in the reader. If you have a new card reader, install it using the instructions accompanying the reader.
1Remove the PC Card from your camera (page
2Insert the PC Card into the card reader on your computer.
☛If your card reader is attached to a PC running NT 4.0, you may need to reboot your system each time that you insert a PC Card into the reader.
