Kodak DCS500 manual Saving White Balance Settings using your Camera

Saving White Balance Settings using your Camera

You can save the current camera-generated White Balance settings, then apply the settings to subsequently captured images.

1 Capture an image with a neutral area (such as a gray or white card) in the center.

2 With the White Balance Setting screen displayed, choose Save (Image nnnn).

A confirmation screen appears.

3 Select Yes to save the setting or No to return to the White Balance Settings menu without saving.

If you save the setting, it appears on the White Balance Settings and the Delete White Balance Settings screens.

Saving White Balance Settings using the Computer

You can also save White Balance settings to a PC Card using the DCS Acquire Module or DCS TWAIN Data Source, then load the settings in your camera.

1Capture an image with a neutral area (such as a gray or white card) in the center.

2Using the DCS Acquire Module or DCS TWAIN Data Source, save the White Balance setting to a PC Card. (Refer to the KODAK PROFESSIONAL DCS Host Software User’s Manual.)

☛When you save a White Balance setting to a PC Card, a “.wb” extension is added to the file name. For example, if you save the setting from a file named A0601385.TIF, the setting will be named A0601385.wb on the PC Card.

3On your camera, select Custom White Balance (page 8-3).

4Load the White Balance setting from the PC Card to your camera (page 8-7).

5Select the desired Custom White Balance setting (page 8-6).

8

Exposure

8-9