Camera Straps

Two camera straps are included with your camera. You can attach either or both.

Attaching the Neck Strap

Thread the ends of the neck strap through the strap fixtures as shown. Pull firmly on the strap to make sure it is held securely by the buckles.

CAUTION:

If you are planning to use both the neck strap and the hand strap at the same time, follow the instructions for attaching both the hand strap and neck strap (described on page 2-24). Failure to attach the straps properly can cause the camera to drop.

Attaching the Hand Strap

1 Thread the strap through both loops in the hand strap pad.

2 Place the three-holed buckle on the strap and thread through the camera’s top strap fixture.

3 Thread the other end of the strap

through the camera’s bottom strap fixture.

2-22

Page 44
Image 44
Kodak DCS500 manual Camera Straps, Attaching the Neck Strap, Attaching the Hand Strap