Setting Powersave Time
You can change the PowerSave time using the same procedure described for changing Display Off time. Refer to “PowerSave Mode” on page
Determining Total Actuations
You can determine the number of images captured by your camera from the time of its manufacture.
With the Properties menu displayed, select Total Actuations.
The Total Actuations screen appears, informing you of the number of images captured.
Use Folder 1
You can specify whether the default place to store images is an empty folder or folder 1 when you insert a new PC Card.
1 With the Properties menu displayed, select Use FOLDER01.
This Use Folder 1 screen appears.
2 Highlight Yes or No.
If you select Yes, every time you replace your PC Card, images will be stored in folder 1.
If you select No, every time you replace your PC Card, images will be stored in the first empty folder found on the PC Card.
6
