Camera Properties
You can set the following camera properties using camera controls: Display Off time, PowerSave time, Enable Sharpening, Dropdown Menu Lag Time, Use FOLDER01,and Resolution. You can also specify Custom Functions settings. The list of properties may change as new versions of firmware become available.
Setting Display Off Time
Extended use of the Back LCD panel can drain your battery.
To change the length of time before the Back LCD panel turns off:
1 Select the Menu icon, then choose Properties from the dropdown menu (page
1 With the Properties menu displayed, select Display Off Time.
The Display Off Time screen appears.
This screen (and the Powersave screen) operate a little differently than the others.
2 Press and hold the DISP/MENU button.
A vertical arrow appears at the right of the screen.
3 While continuing to press the DISP/MENU button, rotate the Quick Control dial to change the highlighted number.
4 Release the DISP/MENU button
The vertical arrow goes away and the changed number is displayed on the screen.
6
