5 Insert one or two batteries into the battery charger slots.
On average, the charger will completely charge a battery in approximately one hour. If two batteries are inserted, they are charged sequentially.
6 Once the green light turns on, wait two hours then remove the battery or batteries from the charger.
If you don’t wait two hours, batteries will only be charged to 80% of capacity.
7 Insert a charged battery into the camera.
8 Close the camera door.
The Battery icon appears on the Back LCD panel when there is a battery in the camera, the camera is on, and the camera has not entered PowerSave mode. Refer to “PowerSave Mode” on page
The Battery icon is not displayed if the AC adapter is connected.
If your battery charger does not function as expected, check the following:
✔Be sure the wall adapter is properly connected.
✔Be sure there are no foreign objects lodged in the pockets.
✔Be sure the batteries are inserted so that they properly mate with the connector in the bottom of the pocket.
☛No harm will come to your batteries if you leave them in the charger for an extended period of time.
