Kodak DCS500 manual Fine Spot Metering, Custom Function F-13

Fine Spot Metering

8

DCS 520

M

DCS 560

M

Fine Spot metering ( ) limits the metering area to the center of the viewfinder as defined by the Fine Spot metering mark (approximately 6% of the image area for the DCS 520 and 4% for the DCS 560). Use

this mode when you need an
accurate exposure reading of a
specific subject area.
In continuous shooting mode (	)
or high-speed continuous shooting

mode with the Power Drive Booster

E1 ( L H ), exposure value

determined for the first frame is also used for the second and consecutive exposures.

Exposure

Custom Function F-13

(page 6-6)

This function lets you select Fine Spot metering linked to the focusing points. Metering is limited to the area of the manually selected focusing point, (approximately 9% of the viewfinder image area for the DCS 520 and 6% for the DCS 560).

☛In One-shot AF mode, the exposure setting is locked during Continuous Shooting mode, but the AE lock indicator does not light in the viewfinder.

8-33