Kodak DCS500 manual Resetting the Camera to Its Initial Settings, Resetting All Camera Functions

Resetting the Camera to Its Initial Settings

Resetting All Camera Functions

Reset all of the camera’s functions (except for the custom functions) to their default settings by opening the palm door and pressing the Clear button. After resetting, the camera’s functions are set as shown below:

Function	Setting
Shooting mode	Program AE (P) mode
AF mode	One-shot AF
Metering mode	Evaluative metering
Drive mode	Single exposure (	)
Custom functions	Not affected

Caution:

✔When custom function F-8 is set for center-weighted average metering instead of evaluative metering, and the metering mode is set to partial metering or spot metering, pressing the Clear button will reset all of the camera functions except for the Metering mode, which remains at the current setting.

6

Configuring

6-19