9 Compose the picture and press the Shutter button halfway to set the aperture and focus for the designated depth of field.
The correct aperture value for the designated depth of field and the corresponding shutter speed are displayed in both the viewfinder and Top LCD panel.
If you remove your finger from the Shutter button, the display changes to “ dEP” and the aperture value.
☛ The exposure is determined immediately before the shutter is released.
10 Press the Shutter button completely to capture the image.
Using Automatic Focusing Point Selection Mode
In automatic focusing point selection mode, use the center focusing point to designate the near and far focus points. Otherwise, the basic procedure is the same as for manual Focusing Point Selection mode.
