Kodak DCS500 manual

☛ If the In-focus indicator blinks, the autofocus system cannot focus the subject and the Shutter will not release. Refer to the section on Manual Focusing in Chapter 8 for instructions on how to focus the subject manually.

Exposure settings are displayed in the Top LCD panel and viewfinder Display.

4 After confirming that the exposure settings are not blinking, press the Shutter button to capture the image.

✔If a shutter speed of 30” and the maximum aperture value blink in the viewfinder display, the subject is too dark. Switch to flash photography or choose a higher ISO setting. (Both are described later in this chapter.)

✔If a shutter speed of 8000 and the minimum aperture value blink in the viewfinder display, the subject is too bright. Attach a neutral density (ND) filter to the lens or choose a lower ISO setting.

8-12