Bunn 39130.0000J USER NOTICES, INTRODUCTION, CONTENTS

Page 3

#00658.0000

#37881.0000

39130 052411

#00986.0000

USER NOTICES

Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should

be kept in good condition. Replace any unreadable or damaged labels.

To reduce the risk of electric shock,

do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power before servicing.

#03408.0002

#03409.0002

#12364.0000

WARMERS AND SURFACES ARE HOT

CAUTION

#02765.0000

#00656.0001

As directed in the International Plumbing Code of the

International Code Council and the Food Code

Manual of the Food and Drug Administration (FDA),

this equipment must be installed with adequate

backflow prevention to comply with federal, state

and local codes. For models installed outside the

U.S.A., you must comply with the applicable Plumb-

ing /Sanitation Code for your area.

Optional Field Wiring

120/208-240 V, 15.6-17.5 A, 2980-3850 W

1PH, 3-Wire + GND, 60HZ

#29710.0007

#37881.0002

INTRODUCTION

This equipment will brew a 1⁄2 gallon batch of coffee into an awaiting server. The brewer may have

a hot water faucet for allied beverage use. It is only for indoor use on a sturdy counter or shelf.

CONTENTS

Warranty ................................................................................................2

User Notices ......................................................................................... 3

Electrical Requirements ........................................................................4

Plumbing Requirements & Initial Set-Up ............................................... 6

Operating Controls & Coffee Brewing ................................................... 7

Cleaning & Tank Drain .......................................................................... 8

Adjustments & Optional Settings .......................................................... 9

To reduce the risk of electric shock,

do not remove or open cover.

No user-serviceable parts inside.

Authorized service personnel only.

Disconnect power before servicing.

#00824.0002

#00824.0001

WARNING

• DO NOT OVERLOAD CIRCUIT.

• ALWAYS ELECTRICALLY GROUND

THE CHASSIS.

• DO NOT DEFORM PLUG OR CORD.

• FOLLOW NATIONAL AND LOCAL

ELECTRICAL CODES.

• KEEP COMBUSTIBLES AWAY.

FAILURE TO COMPLY RISKS EQUIPMENT

DAMAGE, FIRE OR SHOCK HAZARD.

READ THE ENTIRE

OPERATING MANUAL BEFORE

USING THIS PRODUCT