TABLE OF CONTENTS |
|
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
TOOL STICKERS & TAGS | 7 |
HOSE TYPES | 8 |
HOSE RECOMMENDATIONS | 9 |
HTMA REQUIREMENTS | 10 |
HOSE & FITTING CONNECTIONS | 11 |
OPERATION | 12 |
TRACK TENSION ADJUSTMENT | 19 |
TROUBLESHOOTING | 20 |
FUEL TANK | 21 |
SPECIFICATIONS | 22 |
FILTERS | 22 |
ACCESSORIES | 22 |
MHP3 MAJOR PARTS ASSEMBLY ILLUSTRATION | 23 |
MHP3 PARTS | 24 |
HOSE & FITTING ILLUSTRATION | 25 |
MHP3 PARTS | 26 |
MHP3 ELECTRIC WIRING SCHEMATIC | 27 |
MHP3 POWER UNIT FRAME ILLUSTRATION & PARTS LIST | 28 |
MHP3 HONDA ENGINE ILLUSTRATION | 29 |
MHP3 HONDA ENGINE PARTS LIST | 30 |
IMPORTANT
To fill out a Product Warranty Recording form, and for information on your warranty,
visit Stanleyhydraulics.com and select the Company tab, Warranty.
(NOTE: The warranty recording form must be submitted to validate the warranty).
SERVICING: This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR
SERVICE OF THIS TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN
AUTHORIZED AND CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
MHP3 User Manual ◄ 3
