Stanley Black & Decker MHP3 Safety Precautions, Keep clear of hot engine parts and exhaust

SAFETY PRECAUTIONS

•Always be well-rested and mentally alert when op- erating the TracHorse and tools. DO NOT operate if affected by medications, drugs or alcohol.

•Keep clear of hot (engine) parts and exhaust.

•DO NOT use flammable solvents around the engine.

•DO NOT reverse tool rotation by changing fluid flow direction.

•Always use hose and fittings rated for 2500 psi/172 bar with a 4 to 1 safety factor. Be sure all hose con- nections are tight.

•Be sure all hoses are correct for current flow direc- tion to and from the tool being used.

•DO NOT inspect hoses and fittings for leaks by us- ing bare hands. “Pin-hole” leaks can penetrate the skin.

•DO NOT operate tools if oil temperature exceeds 140 °F/60 °C. Operation at high temperatures can cause higher than normal temperatures at the tools which can result in operator discomfort.

•Disconnect battery before servicing electrical com- ponents. Electrocution or burns could result from improper contact.

6 MHP3 Manual