OPERATION
ADJUSTING THROTTLE FOR VARIOUS TYPES OF WORK
WARNING
When first learning to operate the Track Horse, position the throttle to the SLOW position. More experienced operators may use higher throttle settings.
FORWARD TRAVEL
The throttle can be positioned anywhere between slow and fast for traveling forward depending on the weight of the load being carried. Heavy loads will require higher throttle settings and low range in order for the engine to provide enough power to move the load.
A switch mounted below the throttle control provides
REVERSE TRAVEL
WARNING
DO NOT attempt to travel in reverse with the throttle positioned above SLOW. This may result in loss of control and result in injury or death to the operator.
Always position the throttle to a slow position for reverse travel to permit increased control and safety.
Always switch the
SLOPE OPERATION
WARNING
DO NOT operate the machine on slopes exceeding 60 percent (30°) in the travel direction or across slopes exceeding 45 percent (24°).
Depending on the load carried in the bed, it may be pref- erable to back up steep slopes.
If traversing over large obstructions such as railroad rail or curbs, travel at an angle (45 degrees) to the obstruc- tion. In some cases it may be easier to back over them.
Avoid turning on slopes. If you must turn, turn slowly downhill, if possible.
DO NOT operate the machine near
DO NOT try to stabilize the machine if it is tipping over. Let go of the machine and get out of its way.
TRAVELING FORWARD OR REVERSE
Track Steering Controls
To travel forward, reverse, turn left, or turn right, do the following:
MHP3 User Manual ◄ 15
