Panasonic KW-WP1050E operating instructions Error messages

Useful Information

Error messages

If the unit detects a problem, one of the following messages is shown on the handset display.

Network:

Display message	Cause/solution
Networks were not	L Move closer to the base unit or an access point.
found.	L Press {Search} to search for networks again.
	L Press {Options} iSelect “Add manually” to add
	network manually.
	L Press {Options} iSelect “Preferred networks”
	to configure preferred networks list.
Could not connect	L A network connection failed.
to <Network name>	L Check that the security type and the network key are
	correct.
	L Press {OK} iRe-connect the network again.
Could not get IP	L The handset could not get an IP address automatically.
address from	L Check that the DHCP server of the base unit is enabled.
<Network name>	L Make sure the Static IP address of the computer uses
	the same address as DHCP lease address.
Failed to connect	L The handset is not registered to the base unit.
to the base unit.	L Register the handset (page 136).
Register again.
Sign in:
Display message	Cause/solution
Your Skype name and	L The Skype name and/or password you entered are not
password were not	correct.
recognized.	L Press {Retry} iRe-enter the Skype name and
	password correctly.
Sign in was not	L Check the network connection.
successful.	L Press {Retry} to try again.

Helpline Tel. No.: U.K. 0844 844 3898 215