Panasonic KW-WP1050E operating instructions 174

Base Unit Settings

3 Configure the settings, then click [Save].

SettingDescription

[Security Mode] L Select the desired security mode.

		L No Encryption (Open), WEP, WPA-PSK and WPA2-PSK are
		available for the wireless devices, including the handset.
		Select the desired security mode for your wireless devices
		connected to the base unit. Default is set to WEP.
	WEP settings
	[Network Key]	For WEP 64bit:
		L Enter the network key containing 5 alphanumeric characters
		or 10 hexadecimal characters.
		For WEP 128bit:
		L Enter the network key containing 13 alphanumeric
		characters or 26 hexadecimal characters.
		L Press [View] to display the network key.
	[Key Index]	L Select [Key 1], [Key 2], [Key 3] or [Key 4] to be used if you
		use WEP. The default is set to [Key 1].
	WPA-PSK/WPA2-PSK Settings
	[Network Key]	L Enter the network key (8 – 63 alphanumeric characters) in
		this data field.
		L Press [View] to display the network key.
	[Data Encryption]	L Select the desired data encryption method.
		For WPA-PSK
		L If your wireless devices use TKIP, select [TKIP] or
		[TKIP+AES].
		L If your wireless devices use AES, select [TKIP+AES].
		For WPA2-PSK
		L If your wireless devices use TKIP, select [TKIP+AES].
		L If your wireless devices use AES, select [AES] or
		[TKIP+AES].
	[Session-Key	L Set the interval for refreshing the encryption key between 30
	renewal interval]	and 604800 seconds. 604800 seconds is the equivalent of
		one week. The default is set to 1800.
4 Click [Restart].

L The base unit automatically restarts and the Top Menu is displayed.

174 Helpline Tel. No.: U.K. 0844 844 3898