Getting Started

Initialization Setup:

Problem

Solution

Initialization Setup is not

L Dialogue boxes may not be displayed immediately due

displayed.

to the state of the LAN.

 

L Check that the LAN or WIRELESS indicator lights in

 

green. Also, check if the LAN card or wireless LAN card

 

is on. If not, check that the LAN is connected.

 

L Check that the power supply was turned on in the

 

following order: modem, router (if you have one), base

 

unit, computer. When turning off the power supply, do

 

so in the following order: modem, base unit, router (if

 

you have one), computer.

 

 

I cannot find the IP

L IP address of the base unit on LAN side changes from

address assigned to the

the default IP address (192.168.102.1), after you restart

base unit on LAN side

the base unit in [AP-DHCP]mode.

after restarting the base

L The handset shows the new IP address assigned to the

unit in [AP-DHCP]mode.

base unit on LAN side. See “View wireless network

 

status” on page 110.

The Initialization Setup

L To make the new mode effective, restart the base unit

still indicates hotel mode

(page 192) after the mode selector position is changed.

after switching the mode

 

selector to home mode.

 

 

 

After failure to enter the

L Wait for 1 minute until the base unit becomes ready and

user name and the

access to http://192.168.102.1 (the base unit's default

password to a prompt

IP address) or http://kxwpa.webpage

screen asking for them

L One minute interval is intentional to avoid malignant

for 3 times, the base unit

access to the base unit.

does not respond.

 

 

 

58

Helpline Tel. No.: U.K. 0844 844 3898

Page 58
Image 58
Panasonic KW-WP1050E operating instructions Initialization Setup Problem Solution, IP address or http//kxwpa.webpage