Panasonic KW-WP1050E operating instructions To LAN port, Switch the Mode selector to Home

Getting Started

AP (Bridge) mode - With an EXISTING ROUTER or MODEM with a built-in ROUTER

If you install the base unit with your existing router or modem with a built-in router, the base unit should be set to AP (Bridge) mode. Select [AP (Bridge)] for your connection mode in Initialization Setup (page 39). In AP (Bridge) mode, the base unit connects wireless devices to one another and to the LAN, and allows wireless devices to use a DHCP server on the LAN. In most cases, routers are equipped with the function as the DHCP server.

1

Mode selector

WAN indicator

Base unit

Computer (if necessary)

To LAN port 4 2

5

AC mains lead

Ethernet cable (not included)

	3 Existing router	Cable or
To AC outlet		DSL modem
	AC adaptor
	To WAN port
	Ethernet cable (included)	Internet

1 Switch the Mode selector to “HOME”.

2 Turn off your computer properly. Unplug any cable connecting your existing router (or modem with a built-in router) to your computer. However, your existing router (or modem with a built-in router) needs to remain connected to your cable or DSL modem.

3 Make sure the base unit is left unplugged. Connect the included Ethernet cable to the “WAN” port on the base unit and an unused Ethernet (LAN) port on your existing router (or modem with a built-in router).

36 Helpline Tel. No.: U.K. 0844 844 3898