Getting Started | Panasonic KW-WP1050E specs

Switch the Mode selector to “HOME”.

Getting Started

1

2 Turn off your computer properly. Unplug your cable or DSL modem’s Mains lead and leave the modem turned off for at least 10 minutes to clear its memory. Unplug any cable connecting the modem to your computer. However, the modem needs to remain connected to the Internet.

3 Make sure the base unit is left unplugged. Connect the included Ethernet cable to the “WAN” port on the base unit and the Ethernet (LAN) port on the modem.

4 Connect a separate Ethernet cable to the “LAN” port on the base unit and the Ethernet (LAN) port on your computer (the same Ethernet (LAN) port you have just unplugged your modem from in step 2).

L You can also connect your computer to the base unit via wireless LAN connection.

5 Plug your modem’s power adaptor into an AC outlet.

L Wait for your modem’s power light to stop flashing before you go to the next step. (It may take a few minutes.)

6 Connect the included AC adaptor cord to the power port on the base unit and an AC outlet.

L When the base unit turns on (The WAN indicator lights in green or amber), the installation is complete.

38	Helpline Tel. No.: U.K. 0844 844 3898

Image 38

Panasonic KW-WP1050E operating instructions Getting Started

Contents

Wi-Fi Phone for SkypeTM This product is designed for use in the following countries Introduction Managing History Index Wireless Travel Router Base Unit Feature highlightsWi-Fi Phone for Use with Skype*1 Hands free speakerphone Telephone Landline What is Skype?How do the units work? Skype System Skype Voicemail SkypeOutSkypeIn Trademarks Important safety instructions Installation Battery If you have any problems For United Kingdom How to replace the fuse Before use User Name and Password Protection Security cautions Introduction Countries permitted to use this product Open Source Software Environment For best performanceBase unit location/avoiding noise Routine care Obstacles during Wireless Connection Accessory information Included accessories Packing the accessories Changing the AC mains lead while travelling Additional/replacement accessoriesModel No Description Front view Rear view Base unit Wireless travel routerControls Receiver # / Line feed key*1 Charge/Ringer indicatorHandset Keypad lock To turn on/off the handsetKey functions Base unit Key Name MUTE/CLEAR Contacts Base unit status indicators Indicator Status Type Colour Pattern Introduction Add contact Symbols used for operationsSending voicemail messages Contacts iSelect Screen shots used for operations For Base unit System requirementsFor your computer For Handset Setup flow A hotel room At home Installing the base unit While you are in a hotel room Internet Getting Started While you are at home AP Bridge modeRouter mode Switch the Mode selector to Home To LAN port Router mode With a Modem only Computer Getting Started Getting Started Initialization Setup flow Creating a new Internet connection profile Initialization Setup If Initialization Setup window is not displayed Retype Setting Description User NamePassword Getting Started Getting Started Settings in step When the Mode selector is set to HomeSetting Description Static When the Mode selector is set to Hotel Getting Started Getting Started Click Restart Getting Started Configuring the Internet connection settings Setting Description DNS Server Setting Description Host Name Domain Name Subnet Mask Setting Description IP AddressDefault Gateway Service Name Domain name 1 255 characters in this data field IP Address For AP-Static Setting Description Connection ModeDefault Gateway For AP-Static Troubleshooting for installation Connection Problem Solution Initialization Setup Problem Solution IP address or http//kxwpa.webpage Internet access Problem Solution Setting up the handset Battery installation/replacement Battery charge Battery level Status Not charging Charging Panasonic battery performance Operation Operating time Text entry Text entry screen Basic operation Phone Symbol tableCharacter table Text entry Screen Turning on the handset Signing in to Skype Starting up for the first time Starting up for the second time Creating a new account Create new account iSelect Handset displays Idle screen Handset status icons Icon Meaning Skype online status in the Idle screen Skype online statusDisplay backlight Icon Your status Main menu Settings Idle mode option screen Setting the time and date Using your contact list Contact list Managing Contacts Skype status icons in contact list Icon Status Adding contacts Adding Skype contacts Save Adding SkypeOut numbersPhone number iSelect Searching for Skype contacts Remove only Removing contactsSee Unblocking contacts on Contact list options Viewing a contact profile Unblocking contacts Blocking contactsBlocking contacts Making a call from the contact’s profile Making a call using the contact listMaking calls Options Call iSelect History iSelect Making a call using HistoryMaking a direct regular phone call SkypeOut Country code + area code + local phone number Making a direct Skype-to-Skype call Ring volume iSelect Adjusting the ringer volumeSettings iSelect Answering calls Rejecting the call Conference Useful features during a call To answer 2nd call To reject 2nd call Diverting to other numbers Setting the call divert destinationDiverting calls Yes iSelect Diverting to voicemail box Setting your welcome messageSettings iSelect Call divert iSelect Voicemail iSelect To play your welcome message Record new iSelect To record a new welcome messageOptions Select iOptions iMy greeting iSelect History iSelect Voicemails iSelect Skype VoicemailListening to voicemail message Send voicemail iSelect History Missed calls, incoming calls, outgoing calls Details*1 VoicemailsPlay*1 Authorization requests Accept Decline Notification screen New missed calls notification New authorization requests notification New voicemails notification New available software notification Contact list full notification 105 Changing your status Setting your profilePersonal Skype online status and profile Change status iSelect Private details Signing out of SkypeDetails shown to all Sign out iSelect Settings iSelect General iSelect Change password iSelect Personal Skype settingsChanging your password Privacy settings Wireless network connection View wireless network status Find wireless networks Connect to a wireless network For WEP security network For WPA-PSKTKIP or WPA2-PSKAES security network Network security iSelect To connect to a wireless network that is not found in rangeAdd manually iSelect Back 114 Networks in range Wireless network settingsSettings iSelect Network iSelect Preferred networks iSelect Preferred networks list Network security Advanced setting Select Advanced setting iSelectNetwork name Select TCP Iphome or TCP Iphotel WPA-PSKTKIP or WPA2-PSKAESiSelect Connection type iSelect iDHCP Ssid broadcast Advanced settingAuthentication To add a network to preferred networks list Auto-connect to open networks list Auto-connectiSelect Settings iSelect General iSelect Software updates iSelect General settingsChange password Auto sign To update the Panasonic firmware Http//panasonic.co.jp/pcc/cs/en/telecom/wi-fi/firmlink.htm 123 Computer Click Update 125 Reset Tones Register the handset Phone settingsSettings iSelect Phone settings iSelect Brightness iSelect Brightness Settings iSelect Information iSelect Handset Information Network proxy Advanced settingsSoftware update Password User name Recovering the handset 133 Service information Viewing the service information Handset Locating the handsetBase unit Registering the handset Setting the base unit from Top Menu Menu items Network Connection Creating a new Internet connection profile Modifying the existing network connection profile 141 Modifying the wireless information Session-Key Setting Description WPA-PSK/WPA2-PSK Settings Network KeyData Encryption Renewal interval Updating the firmware Base Unit 145 Advanced Setup Tab Tab Menu Sub menu1 Sub menu2 MenuSub menu 148 149 Click the Basic tab, then click Internet Connection Basic settingsInternet Connection 151 Click Delete MAC Address Clone Cloned MAC Address Setting Description MAC Address CloneOriginal MAC Address Click the Advanced tab, then click LAN/DHCP Server Advanced settingsLAN/DHCP Server Address Dhcp ServerStarting IP Number Setting Description MAC Address Static Dhcp IP Address Reservation Click Restart Port Forwarding Click the Advanced tab, then click Port Forwarding Forwarding IP Status/PortForwarding Protocol Select whether to enable or disable the DMZ feature DMZ UPnP Easy Security Reception Setting Description TransmissionNot work well, select Enable Except Ident Packets Packets with Packet Filtering Click the Advanced tab, then click Packet Filtering 166 Action Status/PacketFiltering Direction SettingDescription Log Output Routing Network/Mask Setting Description StatusDestination Gateway Wireless Wireless Basic 172 Wireless Security Click the Wireless tab, then click Wireless Security 174 MAC Address Filtering To enable or disable MAC address filtering featureClick the Wireless tab, then click MAC Address Filtering To configure MAC address filtering entry Click the Wireless tab, and then click MAC Address Filtering 177 Status Routing Table WAN Interface StatusLAN Interface Status ARP Table Dhcp Server Status Dhcp Lease Table UPnP Port Mapping Table Wireless Status Bssid Handset Status Version Information Maintenance Password Click Restart Update Firmware Click the Maintenance tab, then click Update Firmware 188 Reset to Factory Default Save Settings Click the Maintenance tab, then click Save Settings Load Settings Click the Maintenance tab, then click Load Settings Restart Click the Maintenance tab, then click Packet Filtering Log Packet Filtering Log Click the Maintenance tab, then click UPnP Port Mapping Log UPnP Port Mapping Log Click the Maintenance tab, then click Connection Log Connection Log Support Help Support Link 198 199 Static IP Address 201 On your computer On the base unit Mode selector Internet Connection Mode Reset buttonDefault settings Wireless Connection Settings Advanced Setup Click Start, then click Control Panel Setting your computerObtaining an IP address automatically on your computer Select Internet Protocol TCP/IP, then click Properties Setting the static IP address on your computer Select Obtain an IP address automatically 208 209 Changing the proxy server settings on Web browser 211 Setting UPnP to display the shortcut Using your computer on a wireless LAN 213 Additional accessories Headset optional Error messages Hardware Error This feature canNetwork Please try again Later This feature is not Phone serviced Occurred Battery errorPress OK to power Off your device This device can Updated before it Battery levelUpdate process Device must be Greeting message Click Start. iAll Programs Accessories iCommand Prompt TroubleshootingTop Menu Problem Cause/Solution Problem Cause/Solution Computer communication Problem Cause/Solution XXX.XXX.XXX.XXX Base unit Indicators Problem Cause/Solution Contact list Problem Cause/Solution Battery charge Problem Cause/SolutionNetwork connection Problem Cause/Solution Sign in to Skype Problem Cause/Solution Making/Answering calls Problem Cause/Solution Handset Indicator Problem Cause/Solution Updating Firmware Handset Problem Cause/Solution Handset locator Problem Cause/Solution Declaration of Conformity Important Safety InformationFor European Union EU Contact Household waste For business users in the European Union FCC and other information FCC RF Exposure Warning Responsible party FCC Warning Industry Canada IC and other information RF Exposure Warning Conditions ambiantes Règles d’Industrie Canada et autres renseignementsAvis Entretien de routine 233 AP Bridge feature SpecificationsBase unit Router feature Feature Wireless feature Other feature Handset Skype feature Network feature 237 Index 239 Copyright Sales and support informationCustomer Care Centre