Panasonic KW-WP1050E Setting Description WPA-PSK/WPA2-PSK Settings Network Key, Data Encryption

Base Unit Settings

Setting

Description

WPA-PSK/WPA2-PSK Settings

	[Network Key]	L Enter the network key (8 – 63 alphanumeric characters) in
		this data field.
		L Press [View] to display the network key.
	[Data Encryption]	L Select the desired data encryption method.
		For WPA-PSK
		L If your wireless devices use TKIP, select [TKIP] or
		[TKIP+AES].
		L If your wireless devices use AES, select [TKIP+AES].
		For WPA2-PSK
		L If your wireless devices use TKIP, select [TKIP+AES].
		L If your wireless devices use AES, select [AES] or
		[TKIP+AES].
	[Session-Key	L Set the interval for refreshing the encryption key between 30
	renewal interval]	and 604800 seconds. 604800 seconds is the equivalent of
		one week. The default is set to 1800.
5 Click [Restart].

L The base unit automatically restarts and the Top Menu is displayed.

Note:

L The settings under the Network Connection heading display the network information for the Internet connection on WAN side. See the Network Status page on page 178 for detail.

L The settings under the Wireless Information heading display the wireless network information for the handset and wireless devices connected to the base unit. See the Wireless Status page on page 182 for detail.

L If you click [View], the current network key is displayed. You may need this information when you set up your wireless devices.

Helpline Tel. No.: U.K. 0844 844 3898 143