Panasonic KW-WP1050E Modifying the existing network connection profile, Click Restart

Base Unit Settings

3

4

5

6

Select the connection mode, then click [Next>].

Configure the connection mode you select in step 3, then click [Next>].

L See “Configuring the Internet connection settings” on page 51 for instructions.

Confirm the settings you are about to save, then click [Save].

Click [Restart].

L The settings that you have just configured are saved as profile No. 1 (HOME mode) or No. 2 (HOTEL mode) according to the position of the Mode selector. The profile is automatically named “Automatic generation” and saved.

L If you click [Default Profile], you can revert the WAN side setting back to default setting (DHCP).

If you have no specific instructions for the Internet connection from the hotel front desk, use [Default Profile] for an easy setup.

L When you click [Refresh], the Internet connection status is refreshed.

L When PPPoE is selected in the Connection Mode, [PPPoE Connect] and [PPPoE Disconnect] are available. You can connect PPPoE by clicking [PPPoE Connect] and disconnect PPPoE by clicking [PPPoE Disconnect].

Modifying the existing network connection profile

1 Click [Network Connection] on the Top Menu.

2 Click [Modify] under the Network Connection heading.

140 Helpline Tel. No.: U.K. 0844 844 3898