Base Unit Settings

L IP address and Subnet Mask under the WAN heading show the current WAN side settings of the base unit.

L IP address, Subnet mask and Starting IP address (DHCP Server) under the LAN (settings) heading show the current LAN side settings of the base unit.

1 Enter IP address, Subnet Mask and Starting IP address (DHCP Server) under the LAN (temporary) heading.

L See also the Help on the LAN (temporary) heading for data entry.

 

Setting

Description

 

[IP Address]

L Enter the IP address and subnet mask corresponding to your

 

 

temporary local network.

 

 

L Set the third number (0 – 255) separated by periods different

 

 

from that of the WAN, such as “192.168.101.1”

 

[Subnet Mask]

 

 

Note:

 

 

L There are some restrictions on IP address entry. For

 

 

example, “0.0.0.0” and “255.255.255.255” are not available.

 

[Static IP Address

L Enter the starting IP address for the DHCP server’s IP

 

(DHCP Server)]

assignment.

 

 

L Set the third number (0 – 255) separated by periods same as

 

 

that of the LAN (temporary) you set above, such as

 

 

“192.168.101.100”

2 Click [Apply].

 

L The restarting page is displayed when the entered IP address, Subnet mask and Starting IP address (DHCP Server) are correct.

200

Helpline Tel. No.: U.K. 0844 844 3898

Page 200
Image 200
Panasonic KW-WP1050E operating instructions Setting Description IP Address, Static IP Address