Panasonic KW-WP1050E Setting Description Connection Mode, IP Address For AP-Static

Getting Started

Setting	Description
[Connection Mode]	LSelect [AP-DHCP]for Connection Mode if the DHCP server
	is operating in the router or modem with a built-in router you
	are using. Select [AP-Static]if you want to assign Static IP
	address.
[IP Address]	For [AP-Static]:
	LEnter the IP address and subnet mask corresponding to
	your local network.
[Subnet Mask]	LSet 4 numbers (0 – 255) separated by periods such as
	“192.168.102.253”.
	Note:
	LThere are some restrictions on IP address entry. For
	example, “0.0.0.0” and “255.255.255.255” are not available.
[Default Gateway]	For [AP-Static]:
	LEnter the default gateway address corresponding to your
	local network by entering the IP address of your existing
	router or modem with a built-in router, for example.
	LSet 4 numbers (0 – 255) separated by periods such as
	“192.168.102.253”.
	Note:
	LThere are some restrictions on IP address entry. For
	example, “0.0.0.0” and “255.255.255.255” are not available.

56 Helpline Tel. No.: U.K. 0844 844 3898