Panasonic KW-WP1050E To connect to a wireless network that is not found in range, Back

Handset Wireless Network Connection and Settings

To connect to a wireless network that is not found in range:

Some networks do not broadcast their network name (SSID), and you can not find these networks in range. When you want to connect to such a network, you need to enter its network name (SSID) and network key.

1

2

3

4

5

6

7

8

While in the Idle mode, press {Options}.

“View networks” i{Select}

{Options}

“Add manually” i{Select}

Enter the network name (SSID) i{OK}

“Network security” i{Select}

Select the security type i{Select}

Enter the network key i{Select}

For WEP security network:

L Enter the network key containing 5 alphanumeric or 10 hexadecimal characters for WEP 64bit or 13 alphanumeric or 26 hexadecimal characters for WEP 128bit.

For WPA-PSK(TKIP) or WPA2-PSK(AES) security network:

L Enter the network key containing between 8 and 63 alphanumeric characters or 64 hexadecimal characters, then skip to 10.

9 Select the key index. i{Select}

L Most of wireless networks use key index 1.

10 {Back}

L The handset attempts to connect the network. After a network connection is completed, you are required to sign in to Skype if you have not signed in yet.

L If failed, error message is displayed, then press {OK} and go back to step 3.

Note:

L In step 5, after {OK}, “Saved” message is displayed. Press {OK} or leave the display for 3 seconds.

L In step 6 to 9, you can set other settings, such as TCP IP and Advanced settings.

Helpline Tel. No.: U.K. 0844 844 3898 113