Panasonic KW-WP1050E Computer communication Problem Cause/Solution, Xxx.Xxx.Xxx.Xxx

	Useful Information
Computer communication:
Problem	Cause/Solution
“The system has	L Turn off all the devices. Turn on the base unit and then
detected a conflict for IP	the computer’s and the handset.
address with the system	L Check that all the computers are set to Obtain an IP
having hardware address	Address automatically.
XX:XX:XX:XX:XX:XX” or	L Check that the available address range and each of the
“Another device on your
	IP addresses of the specific devices in the network do
TCP/IP Internet, which
	not overlap.
has the physical address
XX:XX:XX:XX:XX:XX, is
currently using the same
IP address
(XXX.XXX.XXX.XXX).
Your TCP/IP network
interface has been shut
down.” is displayed in the
dialogue box.
Shortcut icon is not	L UPnP Windows component is not installed in Windows
displayed in the My	XP or Windows Vista. Enable UPnP Windows
Network Places folder or	component (page 212).
in the Network folder.
My computer cannot	L When the Internet connection mode is DHCP, Static or
obtain IP address.	PPPoE, the base unit may lease all IP addresses.
	Restart the base unit and your computer’s.
	L When the Internet connection mode is AP (Bridge),
	check the existing router.
Wireless communication	L Check that the SSID and wireless security settings are
does not work.	same as the base unit settings. These factory default
	setting values are shown on the included Wireless LAN
	sticker.
	L When signal strength is weak, change the location of
	the base unit or get rid of the obstacle around the base
	unit.
After setting MAC	L Check that your computer’s MAC Address is registered
Address Filtering,	in the MAC Address Filtering table (page 175).
wireless communication
does not work.

Helpline Tel. No.: U.K. 0844 844 3898 221