Panasonic KW-WP1050E operating instructions Status/Port, Forwarding IP, Protocol

Base Unit Settings

4 Configure the settings under the Port Forwarding Setting heading. Click [Add] to add a new entry.

	Setting	Description
	[No.]	L Select the desired entry number for the port forwarding
		setting.
		L Entry number represents the priority. Entry number 1 has the
		highest priority.
	[Status/Port	L Select whether to enable or disable the port forwarding
	Forwarding]	feature.
	[Forwarding IP	L Enter the IP address of the computer that is hosting the
	Address]	service.
		L The device registered as the forwarding IP address can be
		accessed from the Internet through the registered protocol
		and port.
	[Protocol]	L Select the desired protocol used to access your hosting
		service from TCP/UDP/TCP&UDP/ESP/GRE.
	[Port]	L Enter the forwarding port number when you select the
		protocol from TCP/UDP/TCP&UDP.
		L If you want to set one port, enter its port number only.
		L If you want to set a range of ports, enter the port numbers in
		the following way: “2000 – 3000”
5 Click [Restart].

L The base unit automatically restarts and the Top Menu is displayed.

Note:

L To edit the setting:

1	Click the desired entry number in step 3.
2	Edit the items in the Port Forwarding Setting page.
3	Click [Save].
4	Click [Restart].
L To delete the setting:
1	Click the desired entry number in step 3.
2	Click [Delete] in the Port Forwarding Setting page.
3	Click [OK] in the confirmation dialogue box.
4	Click [Restart].
160	Helpline Tel. No.: U.K. 0844 844 3898