Panasonic KW-WP1050E operating instructions 141

Base Unit Settings

3 Select the profile you wish to modify from the pull-down menu under the Select Profile heading, then click [Edit].

4

5

6

Configure the connection mode of the profile you select in step 3, then click [Next>]. L See “Configuring the Internet connection settings” on page 51 for instructions.

Confirm the settings you are about to save, then click [Save].

Click [Restart].

L The base unit restarts in the connection mode that is registered as HOTEL or HOME mode in the profile you have just created. (The position of the Mode selector switch determines the connection mode.) However, editing the AP (Bridge) mode profile while the Mode selector is switched to “HOTEL” does not restart the base unit with the AP (Bridge) mode profile.

Note:

L To delete a profile

1

2

3

Select the desired profile from pull-down menu, then click [Delete] in step 3. Click [OK] in the confirmation dialogue box.

Click [Restart].

–If you delete the profile you are currently using for HOTEL or HOME mode, the profile will be reset to the default setting (DHCP).

Helpline Tel. No.: U.K. 0844 844 3898 141