Getting Started

Setting up the base unit for the first time (Initialization Setup)

For security purpose and enabling the Internet connection, it is necessary to set up the base unit at the very first time. You can log in the base unit and configure the unit’s settings using the Web browser on the computer you connected to the base unit’s “LAN” port.

Important:

L Required Web browser:

Microsoft Internet Explorer 6.0 or later for Windows Mozilla Firefox 1.5 or later for Windows

L You may need to change the appropriate settings of your computer (page 206).

When you access to the base unit for the first time or after resetting the base unit to factory default (page 189 and 204), you must go through Initialization Setup.

First you must set the user name and the password. (Remember your user name and password in order to access the base unit again.) After that you need to configure the Internet connection settings.

The base unit has a Mode selector (page 203) to allow users to switch its Internet connection settings between the HOME mode and the HOTEL mode simply.

The base unit can contain up to 4 Internet connection setting profiles and 2 among those 4 setting profiles can be assigned to the mode selector positions which are HOME mode and HOTEL mode.

For example, a setting profile of AP (Bridge) connection mode for the HOME mode and an another setting profile of DHCP connection type for the HOTEL mode.

You are going to set up those profiles for HOME and/or HOTEL mode settings through the initialization setup shown in the following pages.

Helpline Tel. No.: U.K. 0844 844 3898

39

Page 39
Image 39
Panasonic KW-WP1050E operating instructions Getting Started