ELECTRICAL REQUIREMENTS

CAUTION - The brewer must be disconnected from the power source until specified in Initial Set-Up.

All models have an attached cordset and plug.

US models require 2-wire grounded service rated 120 volts ac, 15 amp, single phase, 60 Hz.

"A" models require 2-wire, grounded service rated 220-240 volts ac, 10 amp, single phase, 50/60 Hz.

"B" models require 2-wire, rated 100 volts ac, 15.0 amp, single phase, 50/60 Hz.

Electrical Hook-Up

CAUTION – Improper electrical installation will damage electronic components.

1.An electrician must provide electrical service as specified on the data plate.

2.Using a voltmeter, check the voltage and color coding of each conductor at the electrical source.

CE Requirements:

•This appliance must be installed in locations where it can be overseen by trained personnel.

•For proper operation, this appliance must be installed where the temperature is between 10°C to 30°C.

•Appliance shall not be tilted more than 10° for safe operation.

•An electrician must provide electrical service as specified in conformance with all local and national codes

•This appliance must not be cleaned by water jet

•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given instructions concerning use of this appliance by a person responsible for its safety.

INITIAL SET-UP

CAUTION - The brewer must be disconnected from the power source throughout the initial set-up, except when specified in the instructions.

1.Insert an empty funnel into the funnel rails.

2.Place an empty decanter under the funnel.

3.Pour three pitchers of tap water into the screened area on top of the brewer. Allow approximately two minutes between pitchers for water to flow into the tank. While the third pitcher of water is entering the tank, the tank will fill to capacity and the excess will flow from the sprayhead, out of the funnel, and into the dispenser.

4.When the flow of water from the funnel stops, connect the brewer to the power source and turn on the power switch (back of brewer) and wait approximately twenty minutes for the water in the tank to heat to the proper temperature. Some water will drip from the funnel during this time; this is due to expansion and should not occur thereafter. Empty the decanter.

5.Pour one pitcher of tap water into the screened area on top of the brewer.

6.After water has stopped flowing from the funnel, allow the water in the tank to completely reheat.

7.Empty the decanter. The brewer is now ready for use in accordance with the coffee brewing instructions.

Page 4

Page 3 Page 5
Page 4
Image 4
Bunn 392 manual Electrical Requirements, Initial SET-UP
Page 3 Page 5

392 specifications

The Bunn 392 coffee maker is a commercial-grade brewer that stands out for its efficiency, durability, and advanced brewing technologies. As a top choice for restaurants, cafes, and other high-demand environments, the Bunn 392 is designed to deliver high-quality coffee quickly and consistently.

One of the most notable features of the Bunn 392 is its ability to brew up to 3.8 gallons of coffee per hour. This high output makes it particularly suitable for busy settings where quick service is essential. With its dual-voltage capability, the machine can be used in various facilities without the need for specialized electrical setups, adding to its versatility.

In terms of brewing technology, the Bunn 392 employs a unique pour-over system that ensures optimal water temperature and contact time for maximum extraction. This method results in a rich and flavorful cup of coffee, making it ideal for coffee aficionados and casual drinkers alike. The machine features a built-in hot water faucet, allowing users to prepare tea, soup, or other hot beverages on demand, further enhancing its functionality.

The Bunn 392 is equipped with a stainless steel construction, which not only adds to its durability but also ensures easy cleaning and maintenance. The exterior is designed to withstand the rigors of a busy kitchen while maintaining an attractive appearance. Additionally, its compact design fits neatly on countertops, making it a space-efficient choice for smaller cafes or restaurants.

This model also incorporates a precision brew timer, allowing operators to set the brewing time according to their specific needs. This feature helps in managing busy periods effectively, ensuring that the coffee is ready just when it is needed most. The Bunn 392 is compatible with different coffee ground types, offering flexibility in coffee selection and flavors.

For safety, the machine is designed with various features, including a splash guard that helps prevent burns and ensures a clean brewing area. Overall, the Bunn 392 combines advanced technology, robust construction, and user-friendly features, making it a reliable choice for those who demand excellence in their coffee brewing equipment. It delivers not just coffee, but an experience that enhances customer satisfaction and operational efficiency.
Top Page Image Contents