PRESET TANK TEMPERATURE

Tank temperatures have been preset at the factory to 180°F (82°C). Bunn recommends that to provide the best quality beverage, the installer adjust the tank temperature to the powder product manufacturer’s recommended temperature for the hot powder product being used.

LIQUID LEVEL CONTROL

The system automatically maintains the hot water tank’s level by energizing the refill solenoid when the water level drops below the liquid level probe. If the system has not successfully refilled in 7 1/2 minutes, a refill error occurs.

When a refill error occurs, the refill solenoid is de-energized and the rinse L.E.D. will flash about once every 5 seconds.

Once the cause of the refill error has been investigated (see the troubleshooting guide) and cured, the system can be reset by disconnecting (for at least 5 seconds) and then reconnecting the power to the machine.

RINSE TIMER

The dispenser is shipped from the factory with the rinse timer disabled. To enable the rinse timer, remove power from the dispenser, remove the lower access panel, and remove the jumper from J1 of the control board. Replace the lower access panel, and return power to the dispenser.

When enabled, the rinse timer automatically keeps track of the time since the dispenser was last run through a rinse sequence. If the dispenser detects that a rinse sequence has not been run for 8 hours, the rinse L.E.D. will flash continually. If, after an additional 4 hours (12 hours total), a rinse sequence has still not been run, the rinse L.E.D. will light continuously, and the hopper drives will be disabled until a rinse sequence has been run.

RUNNING A RINSE SEQUENCE

1.Place the rinse/run switch in the rinse position.

2.Sequentially, or simultaneously, at each of the three positions dispense for at least 10 seconds.

3.After the rinse L.E.D. has extinguished, the rinse timer is reset.

4.Return the rinse/run switch to the run position.

DISPENSER USE

1.Simply place a cup on the drip tray beneath the desired dispensing tip.

2.Press the button to froth and dispense the beverage.

3.Release the button when the cup is approximately 2/3 full and allow the mixing chamber to drain. NOTE - The mixing chamber must drain at the end of each dispense.

cold beverage set-up (Optional)

Cold beverages may be dispensed from the left dispense position. Simply place the HOT/COLD switch near the left whipper chamber in the “COLD” (upper) position.

6

29170 010413

 

Page 5 Page 7
Page 6
Image 6
Bunn FMD0013000-UP Preset Tank Temperature, Liquid Level Control, Rinse Timer, Running a Rinse Sequence, Dispenser USE
Page 5 Page 7

FMD0013000-UP specifications

The Bunn FMD0013000-UP is a state-of-the-art beverage dispenser designed to meet the demanding needs of commercial environments. This model is well-known for its efficiency, reliability, and versatility, making it a popular choice among restaurants, cafes, and convenience stores. With a sleek and modern design, the FMD0013000-UP combines advanced technology with user-friendly features to deliver high-quality beverages quickly and efficiently.

One of the standout features of the Bunn FMD0013000-UP is its intuitive touchscreen interface. This easy-to-navigate display allows users to select from a wide variety of drink options, including coffee, tea, flavored beverages, and more. The touchscreen provides real-time feedback and troubleshooting, streamlining the operation. The configuration can also be customized to suit specific business needs, ensuring a tailored beverage service that can attract and retain customers.

Another significant characteristic of the FMD0013000-UP is its high-capacity design. The unit can dispense multiple beverages simultaneously, which is essential during peak hours. With its advanced cold beverage dispensing technology, it is capable of maintaining consistent beverage temperatures, ensuring customers enjoy drinks at the optimal temperature every time. This model also features programmable portion control, allowing operators to control the amount dispensed to reduce waste and maintain profitability.

The Bunn FMD0013000-UP incorporates durable construction materials, ensuring longevity and ease of maintenance. Its components are designed to withstand the rigors of daily use, minimizing downtime. Additionally, the unit features automatic self-diagnostics which help identify issues before they escalate, making it easier to manage maintenance effectively.

In terms of efficiency, this beverage dispenser is designed to optimize energy use while delivering peak performance. Its advanced cooling and heating systems ensure that beverages are always served at the optimal temperature, reducing energy consumption over time. The Bunn FMD0013000-UP's compact design allows for easy placement in various settings, maximizing space without compromising performance.

Overall, the Bunn FMD0013000-UP stands out for its innovative technology, robust construction, and user-friendly features. It offers a perfect balance of functionality and reliability, making it an excellent investment for businesses looking to enhance their beverage service and cater to the diverse tastes of their customers.
Top Page Image Contents