Manuals / Bunn / Kitchen Appliance / Coffeemaker

Bunn FMD0013000-UP service manual Adjustments, Hopper Dispense Rate of Product, Hopper Throw Test

Models: FMD0013000-UP

1 9
Download 9 pages 47.33 Kb
Page 7
Image 7

Adjustments

The hot or cold beverage solenoids are preset to dispense approximately 9/10 ounce per second. This amount can be adjusted:

1.Disconnect the dispenser from the power source.

2.Remove the small left side access panel.

3.Rotate the control at the base of the desired solenoid(s) clockwise to decrease or counterclockwise to increase the amount of water.

4.For cold beverage adjustment remove the 1-1/2" plug on the lower left side of the dispenser and rotate the needle valve clockwise to decrease or counterclockwise to increase the amount of cold water.

HOPPER DISPENSE RATE OF PRODUCT

NOTE: The hopper dispense rates are preset at the factory. With 22 tooth gear and auger wire the preset dis- pense rate is approximately 3 to 5 grams per second. With 30 tooth gear and auger wire the preset dispense is approximately 5 to 7 grams per second. The hopper dispense rates can be individually programmed to a range of dispense rates from approximately 1.5 to 12 grams per second, as follows:

1.Place the rinse/run switch in the center (program) position.

2.Hold the increase/decrease switch in the desired (increase or decrease) position.

3.While holding the increase/decrease switch, press and release the dispense switch for the chamber you wish to adjust. Each time the dispense switch is pressed, the rinse L.E.D. will flash, and the motor speed for that hopper will be increased/decreased by approximately 2 1/2%.

4.Return the rinse/run switch to the run position after hopper motor speed adjustments are complete.

5.Once any of the three hopper motors has been programmed to the desired speed, either or both of the other hopper motors can be set to the same speed as follows:

a.Place the rinse/run switch in the center (program) position.

b.Press and hold the dispense switch that has been programmed for the correct speed.

NOTE: Care must be taken not to exceed 5 seconds, or a hopper throw test will occur.

c. Momentarily press the dispense switch for the hopper motor to be programmed. The rinse L.E.D. will light for approximately 1 second, indicating that the speeds have been set equal.

d. Release both dispense switches.

e. Repeat step 5. b. through 5. d. for remaining hopper motor if desired.

f. Return the rinse/run switch to the run position after hopper motor speed adjustments are complete.

HOPPER THROW TEST

The hopper throw rate, grams per second (g/s) or ounces per second (oz./s), can be checked by automatically running the hopper motor for 10 seconds.

1.Remove the steam collector and mixing chamber from under the hopper to be checked.

2.Position a small cup under the hopper outlet.

3.Place the rinse/run switch in the center (program) position.

4.Press and hold the dispense switch of the appropriate chamber for 5 seconds. The hopper motor will run for 10 seconds at the programmed speed.

5.Remove the cup and weigh the dispensed product. To calculate the throw rate (g/s or oz./s), divide the total weight of the dispensed product by 10.

6.Replace the mixing chamber and steam collector, and return the rinse/run switch to the run position.

7

29170 010413

 

Page 6 Page 8
Page 7
Image 7
Bunn FMD0013000-UP service manual Adjustments, Hopper Dispense Rate of Product, Hopper Throw Test
Page 6 Page 8

FMD0013000-UP specifications

The Bunn FMD0013000-UP is a state-of-the-art beverage dispenser designed to meet the demanding needs of commercial environments. This model is well-known for its efficiency, reliability, and versatility, making it a popular choice among restaurants, cafes, and convenience stores. With a sleek and modern design, the FMD0013000-UP combines advanced technology with user-friendly features to deliver high-quality beverages quickly and efficiently.

One of the standout features of the Bunn FMD0013000-UP is its intuitive touchscreen interface. This easy-to-navigate display allows users to select from a wide variety of drink options, including coffee, tea, flavored beverages, and more. The touchscreen provides real-time feedback and troubleshooting, streamlining the operation. The configuration can also be customized to suit specific business needs, ensuring a tailored beverage service that can attract and retain customers.

Another significant characteristic of the FMD0013000-UP is its high-capacity design. The unit can dispense multiple beverages simultaneously, which is essential during peak hours. With its advanced cold beverage dispensing technology, it is capable of maintaining consistent beverage temperatures, ensuring customers enjoy drinks at the optimal temperature every time. This model also features programmable portion control, allowing operators to control the amount dispensed to reduce waste and maintain profitability.

The Bunn FMD0013000-UP incorporates durable construction materials, ensuring longevity and ease of maintenance. Its components are designed to withstand the rigors of daily use, minimizing downtime. Additionally, the unit features automatic self-diagnostics which help identify issues before they escalate, making it easier to manage maintenance effectively.

In terms of efficiency, this beverage dispenser is designed to optimize energy use while delivering peak performance. Its advanced cooling and heating systems ensure that beverages are always served at the optimal temperature, reducing energy consumption over time. The Bunn FMD0013000-UP's compact design allows for easy placement in various settings, maximizing space without compromising performance.

Overall, the Bunn FMD0013000-UP stands out for its innovative technology, robust construction, and user-friendly features. It offers a perfect balance of functionality and reliability, making it an excellent investment for businesses looking to enhance their beverage service and cater to the diverse tastes of their customers.