Welcome to Phase Brew!
You’re about to start brewing better coffee in a whole new way! The BUNN Phase Brew with Heat & Release Technology is different from any coffee maker you’ve used before. Unlike typical drip machines, BUNN Phase Brew doesn’t ‘drip’ right away. In fact, it doesn’t drip at all – it flows.
Phase Brew heats all the water to the right brewing temperature, then quickly releases it through our unique sprayhead for an optimal
THE BUNN PHASE BREW EXPERIENCE
the 6-minute heating phase*
When you fill the brew funnel with coffee grounds, the top tank with water, and press the On/Off button, coffee won’t flow into the carafe right away – even though the
What you’ll hear: After a few minutes, you’ll hear some bubbling and rumbling sounds, which are perfectly normal. It’s the sound of our Cyclonic Heating System™ bringing the water to about 200°F – the right temperature to brew without bitterness.
What you’ll see: As you look at the control panel, you’ll see “Heating Water” and a moving ‘racetrack’. This tells you you’re in the heating phase.
the release
When all the water reaches the optimal brewing temperature, it’s released from the top tank to our unique sprayhead – beginning the optimal
What you’ll hear: During the release, you’ll hear a ‘whoosh’ of water to our unique sprayhead.
What you’ll see: As water is released to the sprayhead, the top tank empties and the heating element creates steam. Most of the steam is channeled back into the brew funnel, but some escapes through the top of the brewer.
the 4-minute brewing phase
Following the
What you’ll see: Rich coffee leaving the brew funnel and flowing into the carafe.
What you’ll smell: Amazing coffee aroma!
10 MINUTES TO PERFECT COFFEE!
*Length of heating phase is affected by the temperature of water
poured into the brewer and the room’s temperature.
