SERVICE (cont.)

DISPENSE VALVE

 

 

 

 

D

 

 

 

 

I

 

 

 

 

S

 

L

O

T

I

 

 

 

L

FU

NNE E H

TO

C

AR

URE

 

 

FAIL

 

 

 

 

 

 

 

 

 

 

P1877

FIG. 9 DISPENSE VALVES

Location:

The dispense valves are located inside the top cover, attached to the sprayhead panels.

Test Procedures:

1.Disconnect the brewer from the power source.

2.Check the water level in the tank to confirm that it is within 1/2" from the top of the tank.

3.Connect the brewer to the power source. If the brewer has been set for brewer temperature lock- out, this feature must be disabled. See Page 8 for procedure.

4.Check the dispense valve for coil action. Place the ON/OFF switch in the "ON" position, press and release the BREW switch. Listen carefully in the vicinity of the dispense valve for a "clicking" sound as the coil magnet attracts and repels the plunger.

5.Disconnect the brewer from the power source.

If the sound is heard as described, there may be a blockage in the dispense valve or the water line to the sprayhead. Remove the dispense valve and inspect for wear, and remove waterborne particles.

If the sound is not heard as described, proceed to #6.

6.Connect the voltmeter lead ends to the dispense valve coil terminals. Connect the brewer to the power source. Brewer temperature lockout must be disabled. Place "ON/OFF" Switch in the "ON" position. Press and release the brew switch. The indication must be 120 volts ac for two-wire 120 volt models and three-wire 120/208 volt models.

7.Disconnect the brewer from the power source.

If voltage is present as described, but no coil action is observed, nor "clicking" heard, dispense valve is de- fective. Replace valve and test again to verify repair. If voltage is not present as described, refer to Wiring Diagrams and check the brewer wiring harness. Also check the control board for proper operation. See Pages 22 and 23.

Removal and Replacement:

1.Disconnect wires from the dispense valve.

2.Drain enough water from the tank so the dispense valve is above the water line.

3.Remove water lines from the dispense valve.

4.Remove the two #8-32 nuts securing the dispense valve to the sprayhead panel.

5.Install a new dispense valve using the two #8-32 nuts.

6.Reconnect water lines to the dispense valve and secure in place with clamps.

7.Refer to FIG. 10 when reconnecting wires.

WHI/GRN from PC

Control Board

WHI from Terminal

Block

P1853

FIG. 10 DISPENSE VALVE WIRING

Page 28

29319 091203

 

Page 28
Image 28
Bunn TWIN service manual Service, Dispense Valve

TWIN specifications

The Bunn TWIN,ITB is a remarkable coffee brewing system designed for commercial use, aimed at establishments that require a high volume of coffee while maintaining superior quality. This innovative brewer stands out through its dual brewing capability, allowing users to brew two different types of coffee simultaneously. This feature is particularly beneficial for cafes, restaurants, and other food service locations where diverse customer preferences must be met efficiently.

One of the main features of the Bunn TWIN,ITB is its advanced brewing technology. The system utilizes Bunn's patented brewing process, ensuring optimal coffee extraction and flavor profile every time. It employs a digitally controlled brew timer and state-of-the-art heating elements, providing precise temperature control essential for achieving the ideal brew. This technology allows for consistent results, ensuring that each cup meets the high standards expected in a commercial setting.

The design of the TWIN,ITB is user-friendly and intuitive. It includes an easy-to-read LED display that simplifies programming and monitoring of the brewing process. This streamlined interface enables baristas to adjust settings quickly and efficiently, significantly reducing wait times for customers. Additionally, the unit's low-profile design enables it to fit seamlessly into various kitchen layouts and countertops, optimizing valuable space.

Durability and reliability are at the forefront of the Bunn TWIN,ITB's construction. Built with high-quality materials, the brewer is designed to withstand the rigors of intense daily use. Its stainless-steel finish not only provides a sleek and professional appearance but also makes it easy to clean and maintain, ensuring longevity and excellent performance throughout its lifespan.

Furthermore, the TWIN,ITB features an impressive water capacity with a built-in hot water tank. This allows users to brew large batches of coffee without interruption and offers instant hot water for tea, soups, or other hot beverages. The efficient brewing system utilizes pre-infusion technology, which saturates the coffee grounds before extraction, enhancing the overall flavor and aroma of the brewed coffee.

In summary, the Bunn TWIN,ITB is an exceptional choice for any commercial establishment looking to provide high-quality coffee efficiently. Its dual brewing capabilities, advanced technologies, user-friendly design, durability, and additional features make it a valuable addition to any coffee service operation. Whether busy mornings or afternoon rushes, this brewer ensures that every cup of coffee meets the high standards of taste and quality that customers expect.