To Adjust the Tracking
To adjust the tracking of the stroller wheel (which allows the stroller to roll straight), loosen set screw with 5/32" hex wrench, adjust the bushing with a 3/4" wrench. (See the illustration below or above). Turn the bushing until the wheel is perpendicular to the ground. Test the tracking by pushing the stroller away from you to make sure it rolls straight. Make any additional adjustments before putting your child in the trailer.
When aligned tighten set screw.
Shown without wheel pivot assembly knob
Bushing
Set Screw
To Convert from Strolling to Trailering
The wheel must be placed in the up position in order to attach the trailer to a bicycle. The conversion from “Stroller” (down) position to “Bike trailer” (up) position, is quick and requires no tools. First, engage the parking brake. Loosen the wheel pivot assembly knob by turning it counterclockwise, until the triangular pivot section can be rotated. Swing the wheel up until the word “BIKE” on the triangular pivot section appears. The arrow should point at the “B” in “BIKE”. Line up the small triangular section with the larger triangular section (with
“BIKE” printed on it). Tighten the knob. Now attach the trailer to your bike, using your Burley
hitch, retaining pin or bolt, and safety strap.
B U R L E Y S T R O L L E R K I T O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L