Burley Honey Bee manual Using Seat Harness

Using Seat Harness

One Passenger:

Note: In two-passenger trailers, use inner shoulder straps and middle crotch strap.

1. Place child in center of seat.

2. Snap shoulder straps into Y-buckle, with buckle positioned	Strap Tubes
at child’s sternum. Adjust straps so that child cannot move
too far forward in seat.

3. Fasten and adjust lap belt snugly. Figure 8

IMPORTANT

SINGLE PASSENGER MUST BE SEATED IN CENTER POSITION.

Lap Belt

Figure 8

Two passengers:

Note: For two children, use both shoulder harnesses and two outer crotch straps.

1.Seat first child on one side of seat.

2.Snap shoulder straps into Y-buckle, with buckle positioned at child’s sternum. Adjust straps so that child cannot move too far forward in seat.

3.Repeat for second child.

4.Fasten and adjust lap belt snugly. To remove children, release lap belt and harness buckles. Figure 9

Strap	Strap
Tubes	Tubes

WARNING

ALWAYS SECURE CHILDREN WITH HARNESS AND LAP BELT BEFORE USE. ONLY USE THIS SEAT IF YOUR CHILD IS CAPABLE OF SITTING UPRIGHT ALONE. FAILURE TO DO SO COULD RESULT IN AN ACCIDENT AND SERIOUS INJURY OR DEATH.

Outer Crotch		Outer Crotch
Strap	Lap Belt	Strap

Figure 9

B U R L E Y H O N E Y B E E O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L