Using Parking Brake
Engage parking brake by pushing handle to the right. Exercise caution when disengaging brake, as it may spring to the
left. Photo 3
PHOTO 3
Installing Tow Bar
1.Slide tow bar through both tow bar mounts on left side.
2.Match rear tow bar hole with rear mount hole.
3.Insert the retaining pin through both holes, and lock retaining hoop securely. Figure 6
WARNING
NEVER OPERATE TRAILER WITHOUT RETAINING PIN LOCKED IN PLACE. AN UNLOCKED TOW BAR CAN LOOSEN OR DETACH, CAUSING ACCIDENT RESULTING IN SERIOUS INJURY.
Figure 6
Brake Handle Engaged
Brake
Retaining Hoop
Front |
| |
Tow Bar | Rear Tow | |
Mount | ||
Bar Mount | ||
|
Installing Handle Bar Receivers
1.Using provided hex key wrench and handlebar screws, install inner handlebar receiver sections on upper frame, with narrow end of receiver sections toward trailer rear.
Photo 4 and Figure 7
2.Match outer to inner receiver sections.
3.Insert and tighten knobs.
Screws
Trailer Rear
Inner Receiver
Outer Receiver
Knob
PHOTO 4: Inner Receiver | figure 7 |
B U R L E Y H O N E Y B E E O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L
