Burley d'lite ST, Solo ST Attaching the Seat , Attaching Wheels

Attaching the Seat
1. Behind seat, fasten buckle sections together on upper and
lower straps and adjust as needed. PHOTO 2
2. Attach hooks on seat sides to D-rings by windows
(d’lite ST). PHOTO 3
3. To close the trailer, unfasten buckles behind seat.
Attaching Wheels
1. Push rubber button on outside of wheel hub.
2. Insert axle fully into axle receiver and release
button. PHOTO 4
3. Pull firmly on wheel to check that axle is fully
engaged.
PHOTO 2: Back of d’lite ST seat s hown
PHOTO 3: Seat sides
PHOTO 4
BURLEY D’LITE ST AND SOLO ST OWNER’S INSTRUCTION AND SAFETY MANUAL 5
IMPORTANT
ALWAYS KEEP SEAT ATTACHMENTS FASTENED
WHILE TRAILERING.
MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL SHAFT
FULLY INSERTED INTO AXLE RECEIVER. YOU SHOULD NOT BE
ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY INSTALLED
WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR
SERIOUS INJURY.
WARNING
Axle Receiver
Wheel Hub
Push
Button
D-ring
Hook
Upper and Lower Strap Buckles
Upper Frame Tube