Burley d'lite ST, Solo ST manual Attaching the Seat, Attaching Wheels

Photo 2

Attaching the Seat

1. Behind seat, fasten buckle sections together on upper and lower straps and adjust as needed.

2. Attach hooks on seat sides to D-rings by windows

(d’lite ST). Photo 3 UpperFrameTube

3. To close the trailer, unfasten buckles behind seat.

IMPORTANT

ALWAYS KEEP SEAT ATTACHMENTS FASTENED

WHILE TRAILERING.

UpperandLowerStrapBuckles

PHOTO 2: Back of d’lite ST seat shown

D-ring

Hook

PHOTO 3: Seat sides

Attaching Wheels

1.Push rubber button on outside of wheel hub.

2.Insert axle fully into axle receiver and release button. Photo 4

3.Pull firmly on wheel to check that axle is fully engaged.

WARNING

MAKESUREWHEELSAREHELDSECURELY,WITHWHEELSHAFT FULLYINSERTEDINTOAXLERECEIVER.YOUSHOULDNOTBE ABLETO ROCK OR SHIFTWHEELS. IMPROPERLY INSTALLED WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR SERIOUS INJURY.

AxleReceiver

WheelHub

Push Button

PHOTO 4

B U R L E Y D ’ L I T E S T A N D S O LO S T O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N UA L