Life Fitness SM50 manual Set the weight stack cells

SM50 Unpacking & Assembly Instructions

Figure 3. Set the weight stack cells.

2.Bolt on the teardrop pulleys above the benches (see Figure 4) on the 4 stack cell using two 3/8” x 2-3/4” hex head bolts. Include the 3/8” flat washer, end cap washers, end caps and 3/8” Nyloc nut. Use the bolt configuration shown in Figure 5. You may wish to use a pinch bar to align the bolt holes.

3/8” x 2-3/4” (6)

Figure 4. Bolt on the teardrop pulleys.

5