Using Parking Brake
Engage parking brake by pushing handle to the right. Exercise caution when disengaging brake, as it may spring to the left.
PHOTO 5
BrakeHandleEngaged
Brake
Installing Tow Bar
1.On left side of trailer, depress buttons on top and bottom of tow bar clamp and swing clamp partially open.
Note: When installing tow bar, do not swing the clamp all the way open.
Tow Bar
Mount
2.Slowly slide tow bar into tow bar mount until the detent clicks into place. Photo 6
3.Pull on tow bar to check that it is completely locked
in place.
Detent
TowBar
Button
4. Install retaining pin. Photo 7
5.Close clamp firmly, making sure clamp latch is engaged. Photo 7
6.To remove tow bar, remove retaining pin, pull clamp all the way open and slide tow bar out of mount. Photo 8
WARNING
NEVEROPERATETRAILERWITHOUTTOWBARCLAMPLOCKEDIN PLACE. AN UNLOCKEDTOW BAR CAN LOOSEN OR DETACH, CAUSING ACCIDENT RESULTING IN SERIOUS INJURY.
Burley Jogger and We! Ski can add to your trailering fun! Go to www.burley.com to check out the Burley accessory kits available for your trailer.
To install the tow bar when using these accessories: For the Burley Jogger and We! Ski Kits, follow the instructions above.
Tow Bar
Clamp
PHOTO 6: Install tow bar
TowBarMountRetainingPin
Close
ClampLatch
Button
TowBar
TowBarClamp
PHOTO 7: Lock tow bar in place
Slide Out
Tow Bar
Open
TowBar
Button
Towbarclampinopenposition
PHOTO 8: Removing tow bar
Mount
B U R L E Y D ’ L I T E S T A N D S O LO S T O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L
