4.Note the raised markings indicating battery orientation. Hold the XT-120 with mounting rails on top and the battery receptacle facing you. Insert a battery on the left side with the negative end first. Insert the other battery on the right side with the positive end first.
5.Place the bottom lip of the backplate into the bottom groove of the battery compartment and pivot upward until the tab engages into the retaining slot with an audible “click.”
6.Ensure proper functioning by manipulating the mode selection switch and rocker switch to make sure that the light turns “ON.” If not, make sure that the backplate is installed properly and if the light still does not operate, remove the backplate and make sure that the batteries are installed correctly.
CAUTION:
We recommend that you DO NOT store the
18
