Burris XT-120 manual Maintenance

MAINTENANCE

WARNING:

Make sure the weapon has been “cleared” and on SAFE before mounting or dismounting the XT-120 by following the instruction manual for your firearm. Allow bulb assembly to completely cool before servicing.

1.Clean the XT-120 with mild, soapy water and rinse thoroughly with clean water to eliminate residue. Dry with a soft cloth. Clean anytime after the XT-120 becomes dirty or after exposure to salt water.

2.Clean the aiming and illumination beam windows by wiping with a soft cloth moistened with clean water, alcohol or window cleaner. To facilitate clean-up of the flashlight lens, rub a small amount of oil or lubricating solvent on the exterior lens ONLY prior to shooting.

3.Clean the electrical contacts with cotton swabs dipped in alcohol. For heavier build-up, use a pencil eraser.

4.For replacement bulbs (Part #626080), contact your dealer or contact Burris for the location of your nearest distributor.

19