BCR31DAB
6
Carefully remove your DAB+ Receiver from the box. You may wish to store the packaging for future use.
In the Box
Inside the box you will find:
n DAB+ Radio (Main Unit)
n Power Adapter
n User Guide
Positioning your DAB+ Radio
Place your DAB+ Receiver on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
n Where the radio will be exposed to direct sunlight.
n Where the radio will be close to heat radiating sources.
n Where the humidity is high and ventilation is poor.
n Where it is dusty.
n Where it is damp or there is a possibility of water dripping or splashing onto unit.
Adjusting the Aerial
The aerial should be extended to ensure you receive the best reception possible in both DAB+ and FM radio modes. It
may be necessary to alter the position of the DAB+ RADIO and /or aerial to achieve the best signal.
Using Headphones
You will require headphones fitted with a 3.5 mm diameter stereo plug. The headphone socket is located on the back
of this unit. Headphones are not supplied with this DAB+ Receiver.
Turning the Unit On/Off
Connect the power adapter to the DC Jack on the back of the unit. Then insert the power adapter into the wall outlet.
Turn the mains power on and then press the STANDBY Button to turn on the unit. Press the Standby Button to turn
the unit to Standby.
When you turn on your radio for the first time you will be presented with this
image.
Getting Started