Bush DPF801/DPF1001 manual Connection, Supported Interfaces

1 Connection

Connect the DC plug of the AC-DC power adapter to the DC IN (9V) socket at the back of the photo frame. Connect the power adaptor to a AC 230/240V mains socket.

Caution:

Only connect the mains adapter to a properly installed wall socket with a voltage matching to the"Technical data" of the mains adapter. Using an incorrect adaptor could damage your photo frame or adaptor. The remote's battery is factory installed, Open the battery compartment door and remove the protective battery sheet before use. When the battery becomes weak, replace the battery with a type CR2025 3V Lithium battery. When installing the new battery make sure to install the battery with the "+" side up.

2 Supported Interfaces

SD/MMC: with dimensions of 24mm x 32mm x 2.1mm (about the size of a postage stamp) as shown in the illustration:

MS: dimensions for the MS Card are 50mm x 21.5mm x 2.8mm, which is the exclusive memory card format for Sony's digital products, as shown in the illustration:

USB: supports 1.1 and 2.0

CF:

Note: This unit has been designed where possible to be compatible with most makes of USB device and memory cards. Due to the many varied types available, we cannot guarantee that all makes and models are able to be used.

3