Bush Hog 1947 Installing Mounting Brackets, Installing Side Frames, Installing Grease Fittings

ASSEMBLY

ASSEMBLY

Installing Mounting Brackets

Install all mounting brackets on the tractor according to instructions packed with mounting kit.

NOTE: Leave all hardware loose until the loader is completely assembled to facilitate assembly and proper loader alignment.

Installing Side Frames

Position hinges (30) inside of side frames (13 & 14). Install 5/8 x 4-1/2 carriage bolts (35) as shown and secure with lock nuts (36).

Position side frames (13 & 14) over the loader mounting brackets and secure with hardware according to instructions packed with mounting kit.

Installing Grease Fittings

Install 1/4 x 45 grease fittings (12) into the rod end of bucket cylinders. Install 1/4 straight grease fittings (4) into the tube at bucket end of lift boom arms. Also install 1/4 straight grease fittings (4) into base and rod ends of lift and bucket cylinders.

Install Bucket

Attach bucket to lift boom frame and bucket cylinders with 1” x 4-3/8” pins (6), 3/8 x 1” shoulder bolts (9) and lock nuts (7).

1947/2047 01/11 Assembly Section 3-4

© 2011 Alamo Group Inc.