![](/images/new-backgrounds/1115562/11556215x1.webp)
|
| SPECIFICATIONS |
|
|
| |
MODEL | SIZE | TYPE HITCH | HUBS | SPOONS | APPROX. WT. |
|
30” | Pull | 4 | 32 | 175 lbs. |
| |
48” | Lift | 6 | 48 | 290 lbs. |
| |
60” | Lift | 8 | 64 | 350 lbs. |
| |
72” | Lift | 10 | 80 | 390 lbs. |
| |
| SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE |
|
| |||
|
|
|
|
|
|
|
|
|
|
| Mast | Top Link |
Figure 1 | Lift Point |
|
Weight Rack
Greasable Shaft Sleeve
Parking Strand
Lower Lift Point
Spoons
SECTION I
OPERATION
WARNING
DURING IMPLEMENT ADJUSTMENT
KEEP BODY, HANDS AND FEET CLEAR OF SPOONS OR FRAME.
ATTACHMENT (Lift Type)
The implement should be placed on level ground.
Place the tractor rockshaft control in “position con- trol”
Back the tractor until the ends of the lift arms can be attached to the lift points on the implement. Secure the lift arms to the mast. (Figure 1)
Attach the center link to the top of the mast and adjust so that the frame will be level in the operating position. Remove parking stand and store in the upside down position.
DETACHING FROM TRACTOR
Pin parking stand into position and lower the imple- ment to the ground with rockshaft control in position control. Remove top link from mast, disconnect hitch arms from bottom pins and pull tractor away from implement.
6