MOTION CONTROL LEVER ADJUSTMENT

1.There are three lever height positions available. Place the levers in the position that provides the most confortable operating position for you.

2.Align the levers front/rear position. With the levers in the neutral position, loosen the hard- ware and adjust the levers by tilting forward or backward until properly aligned. tighten hardware.

Lever Position Adjustment Bolts

MOTION CONTROL STEERING ADJUSTMENT

1.Raise the drive wheels of the Zero Turn off of the ground. Safely block the frame in this position so it is secure. This adjustment must be made with the drive wheels turning.

2.Remove the electrical connection from the seat switch and temporarily install a jumper wire across the terminals of the wiring harness.

3.Loosen the jamnuts on the hex turnbuckle, which connects the lever control arm to the pump control arm. Note: the nuts to the front of the hex turnbuckle have left- handed threads.

4.Start the engine. Run the engine at full throttle and release brake.

5.Position the control levers in the neutral position. If the drive wheels creep (rotate) in the neutral position then lengthen or shorten the turnbuckle assembly. Make the adjustment to stop the wheel from rotating.

6.Re-tighten the nuts at the end of the hex turnbuckles and repeat the procedure for the opposite side of the unit.

7.Shut the unit off. Remove the jumper wire from the wiring harness and replace the connectors into the seat switch. Never operate the mower unless all safety switches are operating properly.

DRIVE ADJUSTMENTS

Steering and motion controls should be uniform in all forward and reverse speeds. From the reverse posi- tion the levers should automatically return to neutral when released.

CAUTION

STOP THE ENGINE BEFORE MAKING ADJUSTMENTS.

TEST DRIVE OPERATIONS

Check air pressure in tires. Equal tire pressure is critical for proper drive operation.

1.Raise drive wheels off ground. Safely block the frame in this position.

2. Put control levers in neutral lock position (control levers swung outward).

3.Start engine. Wheels should not rotate. If one or both drive wheels are turning, perform proce- dures under “Motion Controll Adjustment” for side(s) that wheel turns.

Control Arm

Hex Turnbuckle

Jamnut

Control Arm Lever

Pump

Control Arm

17

Page 18 Page 20
Page 19
Image 19
Bush Hog Commercial Series manual Drive Adjustments, Test Drive Operations, Motion Control Lever Adjustment
Page 18 Page 20

Commercial Series specifications

Bush Hog has long been synonymous with durability and efficiency in agricultural equipment, and the Bush Hog Commercial Series takes that reputation to the next level. Designed for professionals in the landscaping, agriculture, and construction sectors, this series offers innovative features and advanced technologies that ensure high performance and reliability in tough working conditions.

At the heart of the Bush Hog Commercial Series is its robust construction. Each model is built with heavy-duty materials to withstand the challenges of demanding environments. Whether you are mowing large fields or tackling tough brush, these machines are engineered to provide consistent results day after day. The reinforced decks and frames are designed to minimize wear and tear, extending the lifespan of the equipment and enhancing its resale value.

One standout characteristic of the Commercial Series is the engineering that goes into its cutting systems. The unique blade design delivers a superior cut while reducing the amount of horsepower required, making the machines more efficient and fuel-efficient. The patented blade technology also ensures smooth operation, minimizing downtime from maintenance.

Furthermore, the Bush Hog Commercial Series incorporates advanced technology for added convenience and safety. Features such as adjustable cutting heights provide users with the flexibility needed to adapt to various terrain and vegetation types. Electric lift options help reduce operator fatigue during extended use, while the ergonomic design of the controls ensures ease of operation.

The series is also equipped with user-friendly maintenance features. Quick-access grease points and a simplified belt system service allow operators to spend less time on upkeep and more time getting work done. This focus on easy maintenance is part of Bush Hog's commitment to keeping your equipment running smoothly and efficiently.

In terms of performance, the Commercial Series units are powered by reliable engines that deliver strong torque and speed, allowing for quick job completion without sacrificing quality. The rugged tires provide excellent traction, enabling these machines to navigate various terrains with ease.

In conclusion, the Bush Hog Commercial Series stands out in the marketplace for its combination of durability, performance, and advanced engineering. With a suite of features tailored for professionals, this series promises to meet the rigors of any landscape, construction, or agricultural project, allowing operators to achieve optimal results while enjoying the benefits of high-quality equipment. Whether users need to maintain pristine lawns or clear overgrown brush, the Bush Hog Commercial Series is ready to rise to the occasion.
Top Page Image Contents