Figure 4-1 B (5) 30 Shots Before Each Use Figure 4-1A

(1) 3 Shots Before Each Use

(2) Before Each Use

 

 

(1) Before Each Use

(5) 10 Shots Before Each Use - (Access through holes in shields of telescoping driveline)

(7) 40 Hrs

(3) Before

Each Use

(4) Before Each Use

To Remove Shield: Turn slotted head 90° with screwdriver, remove turn screw and slide cover back.

Figure 4-1 C

(9) 40 Hrs

(11) 40 Hrs

(10) 40 Hrs

 

 

 

(8) 40 Hrs

 

(12) End Of Season

 

 

 

 

 

 

 

(10) 40 Hrs

 

 

4-3 SPINDLE BELT ADJUSTMENT

Belt tensions should be checked every 40 hours to get maximum life from drive belts and best perfor- mance from the cutter. Belt tension is adjusted by increasing or decreasing the length of the spring on the moveable idlers. For proper belt tension on the mower, the spring lengths should be set at 2- 7/8”. (Figure 4-2) To adjust the spring length, loosen or tighten the 1/2” hex nuts on the spring adjustment rod until the correct spring length is reached.

4-4 SPINDLE BELT REPLACEMENT

Use only genuine Bush Hog replacement parts.

A. Flip up black latches and remove right and left side shields. To remove the outside shields on the wing cutter decks, the wings must be in the folded position.

B. Relieve spring tension by loosening the two 1/2” hex nuts on each spring adjustment rod. (Figure 4-2)

C. Remove old belt.

D. Install new belt as shown below. (Also refer to the decal on underside of belt shield)

1.Disconnect the adjustment rod from the idler assembly. (Figure 4-2)

2.Place belt into the groove on the driving sheave.

3.Work the belt over the other sheaves.

4.Connect the adjustment rod and the idler assembly.

5.Tighten the compression springs on the drive to 2-7/8” long. Tighten the jam nut on the adjustment rod.

6.Replace all shields before operating machine.

 

Figure 4-2 Spindle Belt Diagram

 

 

 

 

 

Adjustment Rod

Idler Assembly

& Spring

 

 

 

 

 

 

 

 

 

 

 

2-7/8”

Driving Sheave

At Gearbox

12

Page 13 Page 15
Page 14
Image 14
Bush Hog TDR-11 manual Spindle Belt Adjustment, Spindle Belt Replacement
Page 13 Page 15

TDR-11 specifications

The Bush Hog TDR-11 is a powerful and versatile implement designed for agricultural and landscaping applications. This robust rotary cutter is engineered to handle a range of demanding tasks, making it an essential tool for farmers, property owners, and landscapers alike. The TDR-11 is primarily known for its efficient cutting capabilities and durability, which are paramount for maintaining fields, pastures, and overgrown areas.

One of the standout features of the Bush Hog TDR-11 is its cutting width of 11 feet, allowing operators to cover large areas in a single pass. This efficiency significantly reduces the time required to clear land or manage vegetation, making it ideal for those with extensive properties. The cutter is designed to handle tough materials, including dense brush and heavy grasses, thanks to its impressive cutting performance.

In terms of construction, the TDR-11 boasts a heavy-duty design. The frame is built from high-strength steel, ensuring durability and long-lasting performance even under the most challenging conditions. The reinforced deck contributes to its ability to resist wear and tear, providing reliability throughout the years.

Another key characteristic of the Bush Hog TDR-11 is its Triple Blade design. These blades are crafted to provide a clean and even cut while minimizing debris and mess. The adjustable blade height empowers the operator to adapt the cutting height to their specific requirements, ensuring optimal results for various applications.

The TDR-11 features a slip clutch driveline, a technology that protects the machine from shock loads and enhances its longevity. This feature allows the implement to operate smoothly while preventing potential damage from unexpected obstacles encountered during operation.

Moreover, the Bush Hog TDR-11 is designed for easy attachment and detachment, making it user-friendly and efficient for operators who may need to switch between different implements frequently. The universal mounting system ensures compatibility with a wide range of tractors, enhancing versatility.

Overall, the Bush Hog TDR-11 is a testament to engineering excellence in rotary cutters, combining robust construction, advanced technology, and practical features. Its capacity to handle various cutting tasks while maintaining ease of use solidifies its position as a reliable choice for those in need of an efficient land management solution. Whether for agricultural purposes or landscaping, the TDR-11 proves to be a valuable asset, delivering performance that meets and exceeds expectations.
Top Page Image Contents