Congratulations on your purchase of the Bushnell® Outdoor Camera! The Outdoor Camera is especially designed to capture the memories of your best outdoor adventures, as it is water resistant, dust resistant, shock resistant and rubberized to provide a sure grip. Of course, with its auto flash and close focus capabillity, it will also deliver great photos indoors as well.
Before using the camera, please read the instructions contained in this manual and take time to familiarize yourself with the camera’s operation and many great features.
Please note that although the camera is weatherproof (JIS Grade 4 water resistance), it should not be used underwater, submerged, or washed with a strong stream of
2water. Damage due to misuse is not covered by warranty.
QUICK GUIDE: BUSHNELL OUTDOOR DIGITAL CAMERA
1 | Install Batteries | Insert 2 AA alkaline or lithium batteries as indicated in the battery compartment on the |
|
| & (optional) | bottom of the camera. An SD card (optional) for additional photo storage may also be |
|
| Memory Card | installed in the card slot inside, with the notched corner on the left, towards the LCD |
|
| display. |
| |
|
|
| |
2 | Turn On the | Press and release the power switch. When the live preview is displayed on the LCD, you |
|
| Camera | are ready to snap a picture. The default settings will provide optimum quality under most |
|
|
| conditions. However, we recommend reading the full manual to take advantage of the |
|
|
| many available options for different photo conditions and user preferences. |
|
|
|
|
|
3 | Set the Menu | Press the OK/Menu button, then the right arrow pad key to open the Mode Menu. Press |
|
| Language and | the down arrow twice to highlight “Set”, then use the right arrow to move over to the Set |
|
| Date/Time | menu list. Go down to “Language”, then press the right arrow. Select your language, and |
|
| press the OK button. The display returns to the Set menu. Keep pressing the down arrow |
| |
|
|
| |
|
| until you highlight “Date & Time” (go past “File Name”), then press the right arrow. In |
|
|
| the Date & Time setting screen, use the left/right arrows to select the date/time part you |
|
|
| want to change, then use the up/down arrows to set it. The letter at the end of the date |
|
|
| line sets the date format (Y/M/D first). The time can be set to a 12 or 24 hour format. |
|
|
| Press OK when finished setting the Date & Time. |
|
|
|
|
|
4 | Format the SD | If you inserted an SD card earlier, format it before using the camera. Go to “ Format” |
|
| Card (optional) | in the Set Menu, and press the right arrow key. Move down to “Yes” and press OK to |
|
|
| confirm you want to format the card. Press OK to exit all menus. |
|
|
|
|
|
|
| 3 |
|
|
| 9/22/04 4:33:31 PM | |